Calibration-TM 5006

Table 4-1

SUGGESTED TEST EQUIPMENT

Description

Minimum

Performance

Requirements

Check Step

Digital Multi meter

+8 V, -26 V, +26 V

All

Test Load Unit

1000 V A capability

All

Variable V oltage

All

Transform er

 

 

As considerable heat is generated in th e test loads do not apply power longer than necessary to complete tests.

1 . Check +26 Vdc

α. Connect the test equ ipment as shown in Fig . 42. Adjust the li ne voltage to the TM 5006 for 10% below the nominal line voltage. ( Nominal li ne voltage is the line voltage t he i nst ru me nt is set to operate on .)

b. Set the +26 V load for m aximum.

ε. CHECK-t hat the dvm reads from +23.7 V to +28.3 V .

d. Change the line voltage to 7ο/ο above nomi nal .

Adjustment

R ecommended

Procedure

Step

Equipment

1

TEK TRONIX DM 505

 

See text

1V ARIACW10MT3WAutotransformer, General R adio USA

b. Set the -26 V load fo r m aximum .

c.CHECK-that the dvm reads from -23.7 V to -28.3 V .

d. Change the li ne voltage to 7ο/ο above the nomi nal li ne voltage.

e.R emove the -26 V load from the supply.

f.Set the +8 V load for maximum.

g.CHECK-that the supply reads from -23.7 V to -28.3 V.

h.R emove the connections to t he -26 V bus for the next step.

e.Remove the load from t he supply .

f. Set t he +8 V load for maxi mum.

3.Check +8 Vdc

α. Connect the test equipment as shown i n Fig . 42. Adjust the line voltage to the TM 5006 for 10 ο/ο below the nomi nal li ne voltage.

g.CHECK-that the +26 V supply reads from +23.7 V to +28.3 V .

h. R emove the connections to t he +26 V bus for t he next step.

2. Check -26 Vdc

α. Connect t he test equi pment as shown in Fig . 42. Adj ust the li ne voltage to the TM 5006 for 10ο/ο below the nominal line voltage.

b.Set the +8 V load for maxim um .

c.CHECK-that the dvm reads from +7 .6 V to +8 .5 V .

d.Change the li ne voltage to 7ο/ο above t he nomi nal .

e.Remove the load from the supply .

Page 70 Page 72
Page 71
Image 71
Tektronix TM 5006 manual Suggested Test Equipment, TEK Tronix DM
Page 70 Page 72

TM 5006 specifications

The Tektronix TM 5006 is a versatile and powerful modular instrumentation platform designed primarily for test and measurement applications. As part of the TM500 series, it provides a wide range of features that cater to various engineering needs, including signal analysis, oscillation measurements, and protocol decoding. It is renowned for its flexible configuration and high-performance capabilities.

One of the standout features of the TM 5006 is its modular design. The chassis can accommodate multiple plug-in modules, allowing users to customize their instrument according to specific requirements. This modularity not only enhances the instrument's usability but also ensures a cost-effective solution, as users can upgrade or change modules as their testing needs evolve.

The TM 5006 supports an array of plug-in modules, including oscilloscopes, waveform generators, frequency counters, and signal analyzers. These modules are engineered to provide accurate and reliable measurements across various parameters, making the TM 5006 suitable for both digital and analog signal testing. Additionally, the ability to integrate different modules facilitates comprehensive testing regimes, enabling engineers to perform a wide spectrum of analyses from a single platform.

Another major technological hallmark of the TM 5006 is its high-resolution display and user-friendly interface. The instrument is equipped with a clear and intuitive interface that allows users to quickly navigate through functions and settings. This ease of use is particularly beneficial in fast-paced testing environments, where time is crucial.

The TM 5006 also boasts advanced measurement capabilities, including high-frequency performance, low-noise operation, and a broad frequency range. Its specifications make it suitable for applications in telecommunications, electronics development, and research laboratories. The built-in triggering mechanisms provide precise control over signal acquisition, while advanced analysis functions enable in-depth signal examination.

In terms of characteristics, the TM 5006 emphasizes reliability and robustness, which are vital for demanding testing environments. The instrument is designed to withstand typical lab conditions, ensuring longevity and consistent performance. Moreover, the TM 5006 complies with various industry standards, providing assurance of its quality and accuracy.

Overall, the Tektronix TM 5006 stands out as an essential tool for engineers and technicians seeking a comprehensive, versatile, and reliable testing platform. Its modular design, advanced measurement capabilities, and user-friendly interface make it an ideal choice for a diverse range of applications in the field of electronics and signal testing.
Top Page Image Contents