Teledyne 7600 operating instructions Options Available, Applications

Infrared Gas Analyzer Introduction

•Instrument or calibration error contact outputs

•Extra functions included such as average value computation, O2 conversion

•Pump ON/OFF contact

1.3Options Available

•Percent O2 detector — Paramagnetic (built-in) or ZrO2 (externally installed), user preference

•O2 correction (the conversion of measured CO and SO2 readings into values at standard O2 concentration). Consult factory for more detail for this function.

•Communication functions:

•RS-232C (9 pins D-Sub connector)

•Half-duplex bit serial

•Modbus protocol

1.4Applications

The Model 7600 Infrared Gas Analyzer is a versatile analytical instrument tool and is ideally suited for multi-parameter gas analysis requirements for applications such as:

•Combustion control within the power, pulp and paper, steel, and cement industries

•Heat treating / Inert gas blanketing atmosphere control

•Bulk-gas impurity analysis within the air separation industry

•Anaerobic digester / Bio-gas / Land-fill gas analysis

•Vent gas analysis of oxyhydrochlorination reactors (EDC)

•Off-gas analysis on PTA and Maleic Anhydride reactors

•Fluid Catalytic Cracker (FCC) regeneration gas analysis

•Ammonia / Fertilizer process gas stream analysis

•Continuous Emissions Monitoring Systems (CEMS)

Teledyne Analytical Instruments 17