Infrared Gas Analyzer | Installation | |
|
|
|
Installation
Installation of the analyzer includes:
1.Unpacking the system.
2.Choosing a suitable location
3.Mounting the analyzer
4.Mounting the terminal module
5.Installing gas connections
6.Making electrical connections
7.Testing the installation.
CAUTION: READ THIS CHAPTER IN ITS ENTIRETY BEFORE INSTALLING THE SYSTEM.
FOR INDOOR USE ONLY.
2.1 Unpacking the Analyzer
The Model 7600 Infrared Gas Analyzer is shipped with the following components:
•7600 Analyzer
•Input/Output terminal module set
•Connection cable
•Power cable
•Fuse (2)
•Cell window mounting tool
•Slide rail (2)*
•Relay board for auto calibration*
•Relay board connection cable*
•Instruction manual
Teledyne Analytical Instruments | 21 |