Proprietary Material | Telenetics 2185 specification

Notice

2001 Telenetics Corporation

25111 Arctic Ocean

Lake Forest, California 92630

(949)455-4000 All rights reserved Printed in U.S.A.

Proprietary Material

Information and software in this document are proprietary to Telenetics Corporation (or its Suppliers) and without the express prior permission of an officer of Telenetics Corporation, may not be copied, reproduced, disclosed to others, published, or used, in whole or in part, for any pur- pose other than that for which it is being made available.

This document is for information purposes only and is subject to change without notice.

Warning

This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communica- tions. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a commercial environment. Operation of this equipment in a residential area is likely to cause interference; in which case the user, at his own or her own expense, is required to take whatever measures may be required to correct the interference.

Image 2

Telenetics 2185 manual Proprietary Material

Contents

Telenetics Proprietary Material Page Page Contents Ordering Information Data Interface FeaturesIntroduction Synchronous Data Retiming Buffer Subchannel ContentionMain Channel Broadcast Applications Anti-Streaming Port-Sharing Mode Port-Sharing Application Modem-Sharing Mode Modem-Sharing Application Co-Located Terminals Cascading Local Cascading Application Remote Cascading Application Specifications Specifications Telenetics Customer Responsibilities Site Selection and Preparation Equipment Supplied UnpackingPacking Materials Damage/Material Shortages Installation Tools Required Installation ProcedureEquipment Assembly Mechanical Installation Rear Panel Assembly Straight-Through Cable Interface Telenetics Operating Controls Indicators Front View Door Closed Inside Front Panel Enabling/Disabling Subchannels Function SwitchesFunction Switch One Function Switch Two Summary Function Switch TwoData Rate Selection Using Switch Segments 1-6 to Switch Segment 2-1 Contention Mode Switch Segment 2-4 Anti-Streaming Enable/Disable Clock Routing Configurations Switch Segment 2-7 Main Channel RTS/DCD Strapping External Clock Reference with Main Channel DTE External Clock Reference with Main Channel DCE Internal Clock Reference with Main Channel DTE Internal Clock Reference with Main Channel DCE Subchannel 1 DCE Clock Reference with Main Channel DTE Subchannel 1 DCE Clock Reference with Main Channel DCE Function Switch Three LED IndicatorsConfiguration Examples DTE/DCE Optioning Digital Bridging Application Example Digital Bridging Application Switch One Switch Two Leased-Line Backup Application Example Switch Three 10 Leased-Line Backup Application Switch One 10. Switch Two 11. Switch Three Multimaster Multidrop Application Example 11. Multimaster Multidrop Application 12. Switch One Settings 2185 a 15. Switch One Settings 2185 B 13. Switch Two Settings 2185 a14. Switch Three Settings 2185 a 16. Switch Two Settings 2185 B 17. Switch Three Settings 2185 B Main Power Connection 18. LED Status Indicator Functions 12 Power Connection POWER-DOWN Procedure Operation Corrective Maintenance Maintenance PhilosophyPreventive Maintenance Recovery from Anti-Streaming Alarm Condition General Packing Information Installations in the USAReturning Defective Equipment for Repair Installations Outside the USA or Canada Telenetics Ordering Information Telenetics Ordering Information Telenetics Glossary Glossary-2 Glossary-3 Glossary-4 Index INDEX-2 INDEX-3 INDEX-4