Texas Instruments TVP5146EVM quick start Real-Time Polling Dialog Box

SLEU063

If the WinVCC4 autoswitch polling function is enabled, then the detected video standard status from the TVP5160 decoder is polled until a change in the input video standard (or in the TVP5160 sampling mode) is detected. When a change is detected, the video encoder is reprogrammed as needed for the detected standard. Using this feature, the video source can change its video standard and the system will display using the new standard without user intervention.

To enable autoswitch polling (recommended), the video-standard autoswitch polling function must be enabled in the Real–Time Polling dialog box as shown in Figure 10. The Real–Time Polling dialog can also be accessed once WinVCC4 is up and running by clicking Real–Time Polling in the Tools menu.

Figure 10. Real-Time Polling Dialog Box

18 TVP5160EVM User’s Guide