Texas Instruments TVP5146EVM quick start WinVCC4 in Depth, Starting WinVCC4

SLEU063

8 WinVCC4 in Depth

The following describes how to use WinVCC4 in depth. It discusses various features and screens which the user m ay encounter while evaluating the TVP5160EVM.

8.1Starting WinVCC4

The Port95NT parallel port driver must be installed before using WinVCC4. WinVCC4 may be started by clicking on Start->AllPrograms->TVP5160EVMSoftware->WinVCC4.

If the dialog shown in the figure below is displayed, it means one of two things:

1.WinVCC4 did not run to completion the last time it ran. In this case, click OK to exit the program and restart WinVCC4.

2.There is more than one instance of WinVCC4 running at the same time. In this case, click OK to exit the program. Then, press CTRL-ALT-DELETE to bring up the Task Manager. Select and click End Task on all occurrences of WinVCC4 or WinVCC4 CONFIGURATION. Then restart WinVCC4.

Figure 7. WinVCC4 Multiple Occurrences Error Message

TVP5160EVM User’s Guide 15