SLEU063 20 TVP5160EVM User’s Guide
8.5.1 System Initialization Clicking System Initialization in the Tools menu displays the dialog shown below. This provides
the means for initializing the video decoder and/or video encoder for a particular video mode.
The details of the initialization are contained in the command file (with a CMD file extension).
The command file is loaded using the Browse… button. Once the command file is opened, a
text list displays descriptions of the individual data sets contained within the command file.
Click once on the desired data set description to select it. Click the Program Device(s) Using
Selected Dataset button to run the selected data set, which loads the devices via the I2C bus.
When the device initialization has completed, the status indicator reads Ready.
NOTE: If Ready does not display, then the devices are not initialized and the I2C bus is not
communicating. See Section 9, Troubleshooting, for possible solutions.
Click the Close button to close the dialog box. Each time the System Initialization dialog is
closed, the initialization file pathname and the data set selection number are saved in the
Windows™ registry to allow these settings to be retained for the next time WinVCC4 runs.
Figure 12. System Initialization