SLEU063
8.2WinVCC4 Configuration Dialog Box
The WinVCC4 Configuration dialog box, as seen in Figure 8, should now be visible. This dialog configures the I2C bus on the TVP5160EVM. All settings from this dialog box are stored in the
Windows registry and are restored the next time the program is started. After initial installation, VID_DECTM will be set to TVP5160 and VID_ENC will be set to ADV7311.
The I2C slave address for each device must match the I2C slave address selected by jumpers on the TVP5160EVM. These jumpers are set by the factory to use 0xB8 for the video decoder and 0x54 for the video encoder.
It is also important to select the correct specific devices. The TVP5160 and ADV7311 must be selected for the TVP5160EVM.
All Program Options must be enabled. Disabling these options is only required if you are debugging a problem with the I2C bus itself.
Clicking OK begins I2C communication with the selected devices.
Figure 8. WinVCC4 I2C Address Configuration
16 | TVP5160EVM User’s Guide |
