![](/images/new-backgrounds/1280311/28031149x1.webp)
|
| SLEU063 | ||
|
| Table 5. Register Map Editor Controls | ||
|
|
|
|
|
| Control | Definition | ||
|
|
|
| |
| Register Window | Scrolling text box that displays the address and data for the I2C registers that are defined |
|
|
|
| for the device. | ||
|
|
|
| |
| Address Edit Box | This contains the I2C subaddress that will be accessed using the Write and Read |
|
|
|
| buttons. Clicking on a row selects an address, which then appears in the address edit | ||
|
| box. | ||
|
| NOTE: After clicking on a row, the Data Edit box contains the data that was in the | ||
|
| register window. The device has not yet been read. | ||
|
| The address up/down arrows are used to jump to the next/previous subaddress that is | ||
|
| defined for the device. If an address is not defined for the device, then it can still be | ||
|
| accessed by typing the subaddress in the Address Edit box. | ||
|
|
|
| |
| Data Edit Box | This contains the data which will be written to or was read from the I2C subaddress. |
|
|
|
| The data up/down arrows incr/decr the data value by 1. | ||
|
|
|
|
|
| Write Button | Writes the byte in the Data Edit box to the address in the Address Edit box. | ||
|
| The I2C register is written to whether or not the data is different from the last time the | ||
|
| register was read. |
| |
| Read Button | Reads the data from the address in the Address Edit box into the Data Edit box and the | ||
|
| register window. |
| |
| Read All Button | Reads all defined readable registers from the device and updates the register window. | ||
|
|
|
|
|
| Hex Button | Converts all values in the register window and address and data edit boxes to | ||
|
| hexadecimal. |
| |
| Dec Button | Converts all values in the register window and address and data edit boxes to decimal. | ||
|
|
|
|
|
| Close Button | Closes the dialog. | ||
|
| NOTE: Multiple edit register map windows can be open at the same time (one for each | ||
|
| device). Use the Window menu to navigate. |
| |
| Loop Count | Causes subsequent write or read operations to be performed N times. N is entered as a | ||
|
| decimal number from 1 to 999. |
| |
| Edit Indirect Registers | Opens the indirect register editor of the TVP5160. | ||
|
|
|
|
|
TVP5160EVM User’s Guide | 25 |