Texas Instruments TVP5146EVM quick start Hardware Setup

SLEU063

5 Hardware Setup

The following describes how to set up the hardware for the TVP5160EVM.

1.Connect the TVP5160EVM boards together using the 120-pin board connector on each board.

2.Connect a CVBS input to the TVP5160 board and a component cable to the YPbPr outputs of the ADV7311 board.

NOTE: For evaluation it is recommended that the YPbPr component video outputs be used in order to bypass the internal video decoder of the TV or video display.

3.Connect the parallel port cable from the TVP5160EVM to the PC.

NOTE: There are footprints for a dc jack and a DB25 connector on the ADV7311 board, but the default power and I2C is provided by the TVP5160 board via the 120-pin connector, P2.

4.Connect the 5-V power supply to the dc jack on the TVP5160 board. A green LED on each board should now be lit.

10 TVP5160EVM User’s Guide