4.2.2Configuring Ethernet settings via Text Management Interface

From the Telnet Main Menu, select “Management setup

Select “Configure Ethernet

Figure 4-5: Ethernet Setup

The system displays the “Ethernet Setup” screen, as shown in

Figure 4-5: Ethernet Setup.

To change to IP assignment mode:

Select “IP assignment mode

Select the appropriate assignment mode from the submenu

If you choose “DHCP” or “Disable Ethernet,” then select “Save changes, restart the network, and Exit

If the administrator sets the IP assignment mode to ‘Static’, the ‘Change IP address’, ‘Change subnet mask’, and ‘Change gateway’ options appear, as shown in Figure 4-6: Static IP Settings:

Figure 4-6: Static IP Settings

RamSan-300/320 User’s Manual

- 28 -

Page 32
Image 32
Texas Memory Systems RamSan-300/320 Configuring Ethernet settings via Text Management Interface, Select IP assignment mode