Now, the front panel display indicates that the system is powering off. Depending on the system mode and the size of memory, this procedure may take a while. The front panel cycles between a power off status bar and an estimated time until the system completes the power off.
*** Powering Off ***
Via Web Management
To perform a manual shutdown via the web interface:
•Click on the “Management Control Processor” graphic
•Click on the “General Info” tab
Press the “Shutdown” button.
Via Text Management
To perform a manual shutdown via Text Management Interface:
•From the Telnet Main Menu, select “Power down system”
•Confirm the power down.
Once the user confirms the power down, the system powers off after completing all writes.
To resume operation, press “Power” button on to the left of the power supplies. For additional details, see Section 2.7 – Turning on the System.
4.3.2Automatic shutdown
In the event that the system senses a high system temperature, power out of specs, or AC power is lost, the system will automatically initiate the shutdown procedure.
| - 30 - |
