•Enables you to set a static IP address for the RamSan.
•Sets the IP configuration to
DHCP
•Disables Ethernet
•Returns to the Main Menu without making any changes
Static
DHCP
None
No change
Talk to your network administrator for the proper IP assignment type. The default factory setting is DHCP. Use the “Select” button to select the desired method of IP assignment. If you did not choose “Static IP” you are asked to confirm the selection with the “↓” button.
To configure the RamSan with a static IP, the system requires the IP address, subnet mask, and a possibly a gateway address.
After you have chosen
“Static IP,” “Ethernet IP” replaces the top line of the display, and the display prompts you to enter an IP. Use the “↑” or “↓” buttons to cycle through the numbers “0” through “9”. To select the value, use the “Select” button. Then, the input prompt moves to the next character position. To back up a space, press the “↑” and “↓” button simultaneously. Repeat this procedure until you have entered the
Ethernet IP
_
| - 26 - |
