Texas Memory Systems RamSan-300/320 manual System is now ready for normal operation

2.In a RamSan-320, the front panel displays “Restoring Data” and cycles between a progress bar and an estimated time until completion. Administrators may use this to determine how much time before the system is on-line. This information is also available through the Text Management Interface. This process will take approximately one minute for every four Gigabytes of system memory.

If all system LUNs are set to Volatile mode, the front panel displays “Initializing” instead of “Restoring Data.”

3.Once the system has restored data, the front panel displays “System Status: GOOD” and shows the performance bars for each Fibre Channel port. The numbers represent the Fibre Channel Controllers. If a controller is not installed, the number and corresponding performance will not display. The top bars represent the port A and the bottom bars represent port B.

Restoring Data ... 73.8%

Restoring	Data ...	73.8%
Est. Time	Left	04:03

System Status:	GOOD
1==- 2=-- 3-	4===

The system is now ready for normal operation.

RamSan-300/320 User’s Manual - 12 -