To set up the network via the front panel, use the arrow buttons to cycle through the
Displays a list of the current IP configuration, hostname, IP address, subnet mask, gateway address (if applicable), and hardware Ethernet address.
Network Config
Show Current Config
To continue setting up the Ethernet configuration.
Shuts down and restarts the Ethernet port using the current IP assignment configuration.
Exits the setup menu.
Network Config
Set IP Config
Network Config
Restart Network
Network Config Exit Menu
Use the arrow buttons to scroll up and down through the list. To continue setting up the Ethernet configuration, select “Set IP Config”.
After selecting “Set IP Config”, you may use the arrow buttons to cycle through:
Enables you to set a static IP address for the RamSan.
Sets the IP configuration to
DHCP
Disables Ethernet
Returns to the Main Menu without making any changes
Set IP Config
Static
Set IP Config
DHCP
Set IP Config
None
Set IP Config
No change (exit)
Talk to your network administrator for the proper IP assignment type. Use the Select button to select the desired method of IP assignment. If you did not choose “Static IP” you are asked to confirm the selection with the ↓ button.
To configure the RamSan with a static IP, the system requires the IP address, subnet mask, and possibly a gateway address.
18 of 48 |
