Cardmedia, ribbon, and supplies are available
fromyour Eltron distributor or call ELTRON at
(800) 344-4003 for the distributor nearest
you.Refer to Appendix B for complete supplies
ordering information.
Installation The following sections serve as a guide to
printer, WindCard™ software, and Windows™
card printer driver installations.
Step Ê
Unpacking With help from another person, remove the
printer from the carton and protective plastic
bag.
AC power supplied to Privilege card printers
must be current limited to 16-amps or less us-
ing an associated circuit breaker or other such
electrical device.
Step Ë
Attach Power Place the printer in a clean, dust free loca-
tion that allows easy access to all sides of the
printer. Never operate the printer while it rests
on a side or upside down.
Set the AC power switch to the OFF (0) posi-
tion.
980179-001Rev. A 7
GettingStarted
Figure 1-1
Printer
Rear Panel
AC Power Switch:
1 = ON
O = OFF
AC Power Switch:
1 = ON
O = OFF