Cleaning Platenand TransportRollersStep 2
Removethe Shrouds that cover the associated
transport rollers. Note that two screws hold
each Shroud in place.
In the following steps, cycle the rollers to reach
initially unexposed areas by applying the
printer power while holding the Panel Button
pressed for three (3) seconds. This is the Test
Cardsequence described in Controls and Indi-
cators in this section.
Inthe following steps, avoid touching the Print
Head. A static discharge can damage delicate
PrintHead elementsas wellas internalcircuits.
46 980179-001Rev. A
Operation
Figure 2-19
Encoder Shroud
Shroud
Fasteners
Shroud
Fasteners