Therma-Tru Smooth-Star, Fiber-Classic Install Foot Bolt Keeper, Insert Plugs, Attach Jamb Cover

26 INSTALL FOOT BOLT KEEPER

Close the active door completely.

Align notch in keeper with foot bolt as shown.

Only the two exposed holes will be used for installation. Pre-drill using a 1/8" drill bit to drill two holes through the holes in the keeper into the sill cap and through the fiberglass of the sill.

Screw (2) #8 x 1" S.S. Pan head sheet-metal screws into the holes.

Exposed holes

Notch

#8 x 1” pan head screw

Foot bolt keeper

27

INSERT PLUGS

Insert supplied hole plugs into roller adjustment holes.

Hole plug

28

ATTACH JAMB COVER

Place jamb cover on inactive jamb with longer edge pointing towards inactive panel. Press into place using a rubber mallet or a wood block and hammer.

Inactive panel

Jamb cover

Long edge

Interior

Inactive jamb

29

SLIDING SCREEN DOOR

Refer to instructions supplied with screen door.

15