Therma-Tru Fiber-Classic, Smooth-Star manual Install Stationary Panel, Install Anchor Blocks

14 INSTALL STATIONARY PANEL

From exterior side of system, install stationary panel by inserting top of panel up into exterior channel in head jamb.

Rotate12bottom of panel in until inactive door riser leg sets into groove.

Slide panel tightly against side jamb

Wipe off excess caulking.

As reference, the exterior side of the panel is always the pre-finished side.

Exterior channel

Head Jamb

Exterior

Sill

15

INSTALL ANCHOR BLOCKS

Head

Insert anchor blocks into top and bottom of inactive door panel.

Using a 1/8" drill bit, drill through angled “toe-screw” hole into head and sill.

Install #10 x 2 ½" pan head screws into “toe-screw” hole.

Fasten anchor block to panel with #10 x 1 ½" pan head screws.

Anchor block

#10 x 2 ½" pan head screw

#10 x 1 ½" pan head screw

“toe-screw” hole

Sill

10