Therma-Tru Smooth-Star, Fiber-Classic manual Screen sold separately Active Panel Inactive Panel

The following packages are needed to complete the installation of your Therma-Tru®Sliding Patio Door System. Check all components for correct size and color.

Frame Kit

1-Head Jamb

2-Side Jambs

1-Sill

1-Active Interlock

1-Inactive Interlock

1-Panel Bumper

12-#10 x 3" Flat Head Screws

12-#8 x 3" Pan Head Screws

1- This Instruction Booklet

2- Anchor Blocks

2- #10 x 1 ½" Pan Head Screws

2- #10 x 2 ½" Pan Head Screws

1-Sill Cap Base

1-Sill Cap Top

1-Drip Cap

1-Head Sealing Fin

2-Corner Pads

1-Foot Bolt

1-Foot Bolt Keeper

1-#8 x 1 ½" S.S. Pan Head Screw 2-#8 x 1" S.S. Pan Head Screws 2-Active Panel Hole Plug

3-#8 x 9/16" Pan Head Screw

1-Jamb Cover

Touch Up Paint

Handle Set Kit 2-Handles

1-Exterior Backplate

1-Interior Backplate

2-Keys

2-Handle Screws

3-Phillips Head Machine Screws

1-Allen Wrench

2-Backplate Gaskets

1-Screen (sold separately)

1-Active Panel

1-Inactive Panel

Active	Inactive
Panel	Panel

Additional Parts

Strike Plate

7 - #8 Flat Head Screws

Tools and materials needed for assembly and installation:

•100% Silicone Sealant and Caulk Gun

•6' Level

•Measuring Tape

•Electric Drill

•#2 Phillips Drive Bit

•Staple Gun or Brad Nails

•1/8" Drill Bit

•Phillips Head Screwdriver

•Gloves

•Safety Glasses

•Partial roll of Insulation

•Shims

•Rubber Mallet

1

Note: Due to ongoing product development, Therma-Tru Corp. reserves the right to make changes in design, materials, and specifications without notice.