Thermador P30 Unpacking, Moving and Placing the Range, Removal of the Four 4 Shipping Bolts

Step 3: Unpacking, Moving and Placing the Range

CAUTION

Proper equipment and ad- equate manpower must be used in moving the range to avoid injury, and to avoid damage to the unit or the floor. The unit is heavy and should be handled accordingly.

•The range has an approximate shipping weight as shown in ChartA.Thegrates,griddleplate and frame, burner caps, front kick panel and oven racks must be removed to facilitate han- dling. This will reduce the weight as shown in Chart A. See Figs. 2A and 2B on Page 5. Do not remove the grill or griddle assemblies.

•Remove the outer carton and packing material from the ship- ping base. The all gas ranges are held to the pallet by four (4) bolts (see Fig. 4). After remov- ing the bolts, the range must be lifted and removed from the pallet.

•Important: DO NOT lift the range by the oven door's handle, as this may damage the door hinges and cause the door to fit incorrectly to the oven cavity.

Chart A	30" Range	36" Range
Shipping Weight	300 lbs.	335 lbs.
Weight without	265 lbs.	300 lbs.
packing materials
Without door(s),	142 lbs.	207 lbs.
burner caps, front kick
panel and oven racks

FIG. 4 – Removal of the Four (4) Shipping Bolts

Pallet

NOTE: Leave adhesive-backed foam layer over brushed-metal surfaces, to protect finish from scratches, until the range is installed in final position.

8