Tiger Products Co., Ltd JD 5101E manual Detailed Maintenance, Replacing In-Tank Hydraulic Filter

Models: JD 5093E JD 5083E JD 5101E

1 182
Download 182 pages 52.08 Kb
Page 87
Image 87
RECOMMENDED FILLING INSTRUCTIONS

MAINTENANCE

RECOMMENDED FILLING INSTRUCTIONS

FOR HYDRAULIC RESERVIORS

When filling or checking the oil level, the unit should be parked on a level

surface, shut “OFF”, and allowed sufficient time to cool to ambient temperature.

Use caution when removing the pressurized breather. Do not place face over opening when removing the breather.

The reservior should be filled to the top of the lower sight glass on the side of the tank. Do not over-fill. The reservior has been over-filled when oil is visible in the upper sight glass. If tank has too much oil, the excess may be expelled through the pressurized breather.

DETAILED MAINTENANCE

REPLACING IN-TANK HYDRAULIC FILTER:

Loosen the four bolts on the top cover of the filter housing. Turn cover counter- clockwise until cover is free. Remove and replace filter.

Cheetah Maintenance Section 4-9

Page 87
Image 87
Tiger Products Co., Ltd JD 5101E, JD 5083E Detailed Maintenance, Recommended Filling Instructions For Hydraulic Reserviors