Tiger Products Co., Ltd JD 5083E, JD 5101E Operation Joystick Control Switch Box, Joystick Master

OPERATION

JOYSTICK CONTROL SWITCH BOX

SAFETY SHIELD

MOWER RUNSWITCH INDICATOR LIGHT

TRAVEL LOCK

MOWER CONTROL SWITCH SWITCH

JOYSTICK MASTER	DECK FLOAT
SWITCH	SWITCH

The Mower Control switch turns the mower “ON” and “OFF. This switch is to be in the “OFF” position to start the tractor. If the switch is “ON” and the tractor ignition switch is turned to “ON” the red “mower run” indicator light will come on. However, the tractor will not start with the Mower Control switch in the “ON” position. Upon starting tractor the “mower run” indicator light may flash briefly, and may flash briefly again when tractor is shut down.

If tractor starts with switch on, turn off tractor and contact your local Tiger dealership for assistance.

NOTE: DO NOT operate mower head while boom mower is in the boom rest! Red “Mower Run” light indicates mower is “ON” when tractor engine is running.

The boom functions are controlled by an electronic joystick. The Joystick Master Switch enables the joystick control for controlling the boom motion functions. This switch is to be in the “OFF” position to start the tractor and when boom is stowed for transporting the machine. The tractor will not start with the switch in the “on” position.

If the joystick control is not operating properly, turn the master switch to the “OFF” position. Install the manual valve handle onto valve and operate the functions individually to stow boom. After boom is stowed in rest, transport the unit to the maintenance facility and contact your Tiger dealer for assistance.

DO NOT attempt to operate the valve manually for mowing operations!

Cheetah Operation Section 3-4