Configure Mode
Use Configure Mode to customize all of the settings on the Global Trainer™ Bodylink® System Watch, from time settings to sensor pairing to GPS settings.
Hands Free
Hands Free settings control automatic starting, stopping, and splits on the chronograph.
To Configure Hands Free Setting
1. Press MODE until CONFIGURE displays.
2.Press to highlight HANDS FREE, then press .
3.Press to highlight a submenu, then press . The selected configure screen opens.
4. Press or to highlight the setting to change, then press to open the setting change window.
5. Press or to highlight a selection in the setting change window, then press to confirm your selection. Settings on each Hands Free submenu are detailed below.
Auto Start/Resume
Setting Group | Adjustment |
|
|
Auto Start | Select ON to start the chronograph automatically when you move at or above the |
| speed threshold. Select OFF to disable auto start. |
|
|
Auto Resume | Select ON to restart the chronograph automatically after you stop and then begin |
| moving again at or above the speed threshold. Select OFF to disable auto resume. |
|
|
Speed Threshold | Enter the speed at which the chronograph will automatically start. Press 8 to close |
| the setting change window. The minimum is 0.10. The maximum is 99.99. |
|
|
Auto Stop
Setting Group | Adjustment |
|
|
Auto Stop | Select ON to stop the chronograph automatically when you go below the speed |
| threshold. Select OFF to disable auto stop. |
|
|
Speed Threshold | Enter the speed at which the chronograph will automatically stop. Press 8 to close |
| the setting change window. The minimum is 0.1. The maximum is 99.99. |
|
|
22