Topcom FIDELITY SMS user manual Making a Phone Call, Caller ID

FidelitySMS_EN.fm Page 7 Tuesday, August 5, 2003 10:30 AM

5 MAKING A PHONE CALL

There are 2 ways to make a phone call :

1.Enter the telephone number. If needed, you can erase the last digits by pressing the Erase button . Pick up the handset or press the Handsfree button . After 3 seconds, the phone number will be dialled automatically.

2.Pick up the receiver or press the Handsfree button . Enter the telephone number.

Note: The call duration timer is shown on the 3rd line of the display [h:mm:ss].

5.1 Last number redial

The Fidelity SMS saves the 5 last dialled telephone numbers in the memory with indication of the call duration, the date and the time. Press the Redial button to scroll through the Redial memory. When the desired number appears on the display, there are two ways to call back :

1.Press the Handsfree button . The desired number will be dialled automatically in handsfree.

2.Pick up the receiver. The number will be dialled automatically after 3 seconds.

Note: The Redial button can also be used as a Pause button while entering a telephone number ! The letter ‘P’ appears on the display on the location where you have added a pause of 3 sec.

5.2 Deactivating the microphone (mute)

It is possible to deactivate the microphone during a conversation by pressing the Erase/Mute button . You can now talk freely without the caller hearing you. The ‘Mute’ icon appears on the display when the microphone is deactivated. Press the Erase/Mute button again if you want to resume your conversation.

5.3 Ringer volume

When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch at the back of the phone (Hi- , Lo- , Off- ).

5.4 Flash Key

Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your telephone company); or to transfer phone calls when you are using a telephone exchange (PABX).

6 CALLER ID

6.1 General information

When you have a subscription to the Caller ID service, the caller’s phone number and name (when supported by the network) will appear on the display. If you saved the telephone number with the name in the Phone Book or in the direct memory, the programmed name will be shown on the display (name tagging function).

During an incoming call, the following information can appear on the display:

NUMBER UNKNOWN

You have a subscription to the Caller ID service but the caller’s number is not available (for ex. international calls).

NUMBER BLOCKED

You have a subscription to the Caller ID service but the caller’s number is a private number.

6.2 Call list

The Fidelity SMS has a Call List where 40 incoming telephone numbers with name can be stored. The phone numbers you have received more than once, will not be stored, but the repeat indicator will be displayed. Every incoming number is saved in the Call List with indication of date and time.

In standby mode the number of new received calls is shown on the display. The new message LED will blink until you have checked all New messages.

ENGLISH

Topcom Fidelity SMS 7