252 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS
The graphic symbol on the touch panel shows the status of the equipment. When one of the graphic
symbols blinks, take the appropriate action referring to the page shown.
1: REPLACE TONER CARTRIDGE symbol
Blinks when the toner cartridge runs out of toner.
"2.REPLACE TONER CARTRIDGE SYMBOL" Page 254
2: CHECK ORIGINALS symbol
Blinks when an original misfeed occurs inside the reversing automatic document feeder.
"1. Paper Misfeed in the Reversing Automatic Document Feeder (optional)" Page 259
3: JAM RELEASING UNIT MISFEED symbol
Blinks when a misfeed occurs in the jam releasing unit.
"2. Jam Releasing Unit Misfeed" Page 262
4: DRAWER MISFEED symbol
Blinks when paper fed from one of the drawers is misfed.
"3. Drawer Misfeed" Page 263
5: OPTIONAL FEEDER MISFEED symbol
Blinks when paper fed from the large capacity feeder/Paper Feed Pedestal (1 drawer type) (optional) is
misfed.
"4. Paper Misfeed in the Large Capacity Feeder/Additional drawer module (optional)" Page 264
6: BYPASS MISFEED symbol
Blinks when a sheet of paper fails to be fed into the equipment during bypass copying.
"5. Paper Misfeed on the Bypass Feed Unit" Page 265
7: DUPLEXER MISFEED symbol
Blinks when a paper misfeed occurs inside the automatic duplexer.
"6. Paper Misfeed in the Automatic Duplexer" Page 265
8: FUSER MISFEED symbol
Blinks when a paper misfeed occurs in the fuser unit.
"7. Paper Misfeed in the Fuser Unit" Page 266
298
7
6
4
5
3
1
11
10
12