Toshiba 280, 230 manual Controlling the Use of the Copier with Department Codes

Controlling the Use of the Copier with Department Codes

With the use of the department codes, you can restrict users as well as manage copy volumes made by

individual groups or departments of your company. See the [User Functions Guide]. 1

1 When the department management function is in use, the screen shown on the right appears immediately after the power switch is turned on.

-The same screen is displayed when the [ACCESS] button is pressed or the automatic function clear mode is activated.

2 Key in a registered department code (5- digit).

- The copier will be ready for copying.

If “Enter Department Code” remains, the department code you have entered may be incorrect. Press the [FUNCTION CLEAR] button or [CLEAR] button, and then key in the correct code.

-After Copying is finished.

If the department control function is in use, be sure to press the [ACCESS] button on the control panel after finishing the use of the equipment. The display returns to the department code input screen and the department management function will remain active.

33