Toshiba 230, 280 manual Switching to the ENERGY-SAVING Mode

3. SWITCHING TO THE ENERGY-SAVING MODE

Switching to the energy-saving mode is available only when one of the following options is installed.

1	-	Fax board
	-	Printer kit
	-	Printer kit and scanner upgrade kit
	-	Printer/scanner kit

If you are not going to use the equipment for a while, press the [ENERGY SAVER] button on the control panel for a few seconds to enter the energy saving mode.

In this mode, the display and lighted button on the control panel are turned off and the [ENERGY SAVER] button lights in green. To start the equipment again, press the [ENERGY SAVER] button (or [COPY], [SCAN], [FAX], [e-FILING], [START] button on the control panel). (To enable the [SCAN] button, optional printer/scanner kit or both printer kit and scanner upgrade kit is required. To enable the [FAX] button, optional FAX board, printer/scanner kit, or both printer kit and scanner upgrade kit is required.)

*In the energy-saving mode, when a job for printing, Fax, Internet Fax or E-mail is received, the equipment becomes automatically ready status.

34 1.BEFORE USING EQUIPMENT