PC connection, Select PC input, Left side view | Toshiba 32W300P

PC connection

As PCs are sometimes supplied with a ‘conventional’ CRT monitor, you may need to adjust the display settings of your PC’s graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor) - select ‘1360 x 768’ for the screen resolution, and select 60 Hz for the on- screen refresh rate. Switch off your PC, then connect it to your LCD TV while both items are still switched off.

Use a PC-VGA cable (not supplied) to connect the LCD- Monitor to your PC. Make the connections carefully so as not to break or bend the contacts inside the plug.

TV

(Left side view)

PC

VGA Cable

(not supplied)

Audio cable

(not supplied)

Select PC input

Switch on the LCD-TV.

Select the PC input mode (see P.10).

Note:

If there is no video signal from the computer when the unit is in

PC mode, “NO SIGNAL” will appear on the TV screen.

Monitor Display modes
MODE	Resolution	Refresh rate
VGA	640x480	60Hz
VGA	720x400	70Hz
WVGA	848x480	60Hz
SVGA	800x600	60Hz
XGA	1024x768	60Hz
WXGA	1280x720/768	60Hz
WXGA	1360x768	60Hz

(according to Graphic card)

Note:

See next page for the PC Monitor Menu.

The PC Monitor Menu settings are not effective for normal TV mode or external input modes.

26

30E2825A_En_P25-31

26

1/15/07, 8:27 PM

Image 26

Toshiba 32W300P operating instructions PC connection, Select PC input, Left side view, Monitor Display modes

Contents

Model 32W300P LCD Colour Television Battery notice FeaturesResolution 1366 x 768 pixels Headphone Warning Contents Safety Precautions Air Circulation Installation and important information Where to install Loudspeakers Front Side Top Description of Indicators and ControlsLocation of controls Remote sensor Remote Control If bright sunlight directly beams onto the unit front Install the batteriesDistance of Remote Control Operation Handset Component input See P.33 Antenna connectionBack Side Selecting the video input source Call Menu and for example Select Auto TuningQuick guide for Menu operation Per the description on previous Preparation Press or to select the desired language On-screen Language SelectionTeletext Language Selection Broadcast colour system Then press Automatic station presetting with the built-in TunerPress To select the correct TV Changing the order of stored channels Select CH Allocation Then press Want to you can also stop the search Manual TV station presettingPress or to select PAL or SECAM-L. Then press Enter Connection to Satellite Receiver Satellite Receiver To AV1 Scart-cable not supplied Basic Operation Channel selection Stereo reception in Germany Stereo reception with the built-in tunerNicam stereo sound reception Illuminates for approx Channel sound receptioninGermany Nicam 2-channel sound reception not availableGermany Select BASS. Then press or to adjust the bass Bass, Treble and Balance Using the surround sound feature Turning off the built-in speakers Select BRIGHTNESS. Then press Brightness, Contrast, Colour and Sharpness/DNRBrightness, Contrast, Colour and Sharpness Back light Improved picture clarity Level you require Mode Picture Quality Selecting the colour temperature/Blue backSelecting the colour temperature Blue back 169 Manual format settingPicture format 149 Auto 43 Default Scrolling the picture in Cinema mode/Auto 43 DefaultScrolling the picture in Cinema mode Or to select 43 or Full Left side view PC connectionSelect PC input Monitor Display modes Press To select CONTRAST. Then press or To adjust Contrast Audio Menu BASS/TREBLE/BALANCE Tone setting menu Connecting an Hdmi or a DVI device to the Hdmi input Selecting the Hdmi audio input source Fastext/TOPtext Switch on / off TeletextTeletext Fastext/TOPtext is teletext with a special directory Example Hold PagesDirectly Select Subpages Enlargement Conceal stored channels Restoring a Concealed Channel DVD player Connecting other units to your TVConnection to other equipment Component output Audio output Connecting an audio systemConnecting a Video camera or Games console DVD player Setting of Scart socket AV2 , select AV2 Input or AV2 Output Power return feature AV colour adjustment/Power return featureAV colour adjustment Menu, select AV Colour Or to select Auto Specifications Troubleshooting table/SpecificationsTroubleshooting table