Connection to other equipment
3.Connecting an audio system
This connection allows you to hear the TV sound through external speakers connected to an audio amplifier.
To control the audio through the amplifier turn on the TV and the amplifier set the volume of both to a moderate level, and turn off the TV’s
Note:
If the volume of either the TV or the amplifier is set to 0 (or OFF), you will not hear any sound.
Note: The Bass/Treble/Balance adjustments (see P.19) only function with the sound from the TV speakers - it does not affect the audio output sockets.
TV (Left side view)
To VAR (variable)
AUDIO OUT
Stereo amplifier
Audio input
(Audio cable, not supplied)
4.Connecting a Video camera or Games console
Connect the Video camera (or Games console, etc.) to the TV with an appropriate AV cable (RCA/Phono) as shown. Select the AV3 input mode to view (see P.10).
Note:
When you input the
TV (Left side view)
Video camera
(example)
AV output
(AV cable, not supplied)
To AV3 IN
5.Connecting to a DVD player or other AV device with Component Video outputs
If your DVD player (or other device) has Component Video output jacks, use a suitable set of leads (RCA/ Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance the picture quality and performance. Please remember that you will also need to connect separate leads (RCA/Phono) for the audio signals. Select the COMPONENT input mode (see P.10).
TV (Left side view)
Audio cord (not supplied)
Video cord (not supplied)
To COMPONENT IN
Y Pb Pr
Component output 
Audio output
Note: | DVD player |
|
|
| |
The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL: | 33 | |
576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p). | ||
33 | 1/15/07, 8:27 PM |
