8
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
Wireless Radio
For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of
other channels is not possible. The device could automatically discontinue transmission in case of
absence of information to transmit, or operational failure. Note that this is not intended to prohibit
transmission of control or signaling information or the use of repetitive codes where required by the
technology.
Important: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTE:
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
PRECAUTIONS

Notes on locating

Place the unit on a level surface. Do not use
it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded
disc may come off the proper position and
cause damage to the unit.
When you place this unit near a TV, radio, or
VCR, the playback picture may become poor
and the sound may be distorted. In this case,
place the unit away from the TV, radio, or
VCR.
Do not use this unit in places which are
extremely hot, cold, dusty or humid.
Do not restrict the air flow of this unit by
placing it somewhere with poor air flow, by
covering it with a cloth, or by placing it on
bedding or carpeting.
Be sure to remove the disc and unplug the AC
power cord from the outlet before carrying the
unit.
•
•
•
•

Notes on handling

When shipping the unit, the original shipping
carton and packing materials come in handy.
For maximum protection, repack the unit as
it was originally packed at the factory. Take
care not to give it a shock or shake when
carrying.
Do not use volatile liquids, such as insect
spray, near the unit. Do not leave rubber or
plastic products in contact with this unit for
a long time. They will leave marks on the
nish.
The top and rear panels of the unit may
become warm after a long period of use.
This is not a malfunction.
When the unit is not in use, be sure to
remove the disc and turn off the power.
If you do not use the unit for a long period,
the unit may not function properly in the
future. Turn on and use the unit occasionally.
•