Toshiba C6609-1201M1 Starting again after Turn Off or Shut down, Enabling the Hibernation command, All, DC only, TOSHIBA Power Saver, 1Click Start, Control Panel

Enhancing Productivity	125
Using Hibernation

7Click Override all Modes with settings here. The Set the range window appears.

Sample Set the range window with DC only option

8Do one of the following:

❖Click DC only if you want the settings to apply only when you are using battery power.

❖Click All for the settings to apply whether you are using battery power or outlet power.

9Click OK to close the Full Power Properties window.

10Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel.

Starting again after Turn Off or Shut down

To start the computer up again, press and release the power button; the on/off light changes to green.

Using Hibernation

Enabling the Hibernation command

Hibernation is a default setting. If it should become disabled, you can enable it as follows:

1Click Start, Control Panel.

The Control Panel window appears.

2Click Performance and Maintenance.

3Double-click the TOSHIBA Power Saver icon.