Enhancing Productivity

133

Using Standby

can set the System standby time on the Power Save Mode tab.

7Click Override all Modes with settings here. The Set the range window appears.

Sample Set the range window with DC only option

8Do one of the following:

Click DC only for the settings to apply only when you are using battery power.

Click All for the settings to apply whether you are using battery power or outlet power.

9Click OK to close the Full Power Properties window.

10Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel.

Starting again from Standby

To start up the computer from Standby mode, press and release the power button until the on/off light changes to green. The computer returns to the screen you were using.

If you put the computer in Standby mode by closing the display panel, you can start the computer again by opening the display panel.