Toshiba D-R2SU Specification, Power requirement during operation, Power requirement at standby

Others

Specification

■Power requirement during operation

34W

■Power requirement at standby

2.7W or below (Eco mode: off)

0.8W or below (Eco mode: on)

■Power supply

120V AC, 60 Hz

■Mass

4.2kg

■External dimension

Width 430 x Height 78 x Depth 325mm

■Incoming channels

TV: 2-69CH, Cable:1-125CH

■Antenna input/output terminal

VHF/UHF: 75Ω, F Connector

■Signal system

Standard NTSC Color TV system

■Laser

Semiconductor laser, Wavelength: 650nm/780nm

■Format

DVD-VR format

DVD-Video format

■Image recording system

MPEG2

■Sound recording system

Dolby digital M1, M2, Linear PCM

■VIDEO input

1.0Vp-p (75Ω), Sync signal negative, Pin jack x 3 systems, 2 at rear, 1 in front

■VIDEO output

1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 systems, 1 at rear

■S-VIDEO input

(Y)1.0Vp-p (75Ω), Sync signal negative,

(C)0.286Vp-p (75Ω), 2 at rear, 1 in front

Mini DIN4 Pin x 3 systems

■S-VIDEO output

(Y)1.0Vp-p (75Ω), Sync signal negative,

(C)0.286Vp-p (75Ω), 1 at rear

Mini DIN4 Pin x 1 system

■COMPONENT output (Y, PB, PR)

Y output (green), 1.0Vp-p (75Ω),

Sync signal negative, Pin jack x 1 system

PB, PR output (blue, red), 0.7Vp-p (75Ω),

Pin jack x 1 system each

■AUDIO input

2.0V (rms), 50kΩ or below, pin jack (L, R) x 3 systems

2 at rear, 1 in front

■AUDIO output

2.0V (rms), 200Ω or above, pin jack (L, R) x 1 system

1 at rear

■DIGITAL AUDIO OUTPUT BITSTREAM/PCM (OPTICAL terminal)

Optical connector x 1 system

■CHANNEL CHANGE IR jack

This is for connection of the supplied IR control cable only.

■DV input

4-pin x 1 in front

144