Toshiba D-R2SU, D-R2SC Delaying the end time of a programmed recording while it is recording

Delaying the end time of a programmed recording while it is recording

While a programmed recording has started, open the lid of the remote control and press EXTEND.

The first press displays the programmed end time (in the front panel display).

Each time you press the button, it is delayed 10 minutes, up to 60 minutes.

Notes

•Pressing a button except EXTEND in the above procedure will set the currently selected delay.

•You cannot delay the end time of a programmed recording which will end within 1 minute from the current time.

•Even if you delay the end time of a programmed recording, the recording will stop when the disc is exhausted.

Introduction RecordingPlayback

Editing

Library Function setup Others

45