Toshiba D-KR2SU, D-R2SU, D-R2SC owner manual 134

Function Setup

Customizing the function settings (Continued)

Aspect ratio(Video mode)	DVD-Video:CHP create
DVD-RW DVD-R	DVD-RW DVD-R

To set the aspect ratio when recording onto a DVD-R/RW disc.

To set whether chapters are to be automatically created at a selected interval during DVD-R/RW recording.

4:3:	Off:
Fixes the aspect ratio at 4:3.	Chapters are not set.

16:9:

Fixes the aspect ratio at 16:9.

Note

•When the bit rate on “AV record quality” is set to

“1.4(Mbps)”, pictures are recorded in 4:3 aspect ratio even if “16:9” is selected.

5 min. : 10 min. : 15 min. : 20 min.

To set the interval at which chapters are automatically created to 5, 10, 15 or 20 minutes.

Note

•The number of chapters has the upper limit, which varies depending on the disc condition. If the number reaches it, no more chapters are created.

DVD compatible mode

DVD-RAM DVD-RW DVD-R

To set whether or not recording is to be performed in the format for which recording is allowed by the DVD-Video standard (video, audio and other data) during recording.

Off:

When recording on a DVD-RAM disc, both the main and SAP sounds are recorded.

When recording on a DVD-R/RW disc, this is ineffective. The recorder will automatically regard this as “Main,” and record sound of the main channel only in stereo. Select “Main” or “SAP” for a DVD-R/RW recording.

Main:

Records sound of the main channel only in stereo.

SAP:

Records sound of the SAP channel only in stereo.

Notes

•When you select the manual rate of the picture quality between 3.0 and 3.8 and set this mode to “Main” or “SAP”, the picture quality may become lower than when you set this mode to “Off”.

•You can change the setting from the Quick Menu.

Rec DNR

DVD-RAM DVD-RW DVD-R

Selects the level of 3D digital noise reduction that can reduce noises of a picture with many noise, depending on pictures.

Off:

Deactivates the 3D digital noise reduction.

On:

Sets the normal level.

Expanded:

Increases digital noise reduction.

Notes

•When you set “Rec DNR” to “On” or “Expanded” and set “3D Y/C Separation” to “On”, the priority changes depending on the input selection. If you select the S-video input, “Rec DNR” has priority. When you select the built-in tuner or composite input, “3D Y/C Separation” has priority.

•If you want to avoid an afterimage, set this setting to “Off”.

3D Y/C separation

DVD-RAM DVD-RW DVD-R

The 3D digital comb filter executes Y/C (Brightness/ Color) separation to reduce the color irregularity or cross color interference.

Off:

Deactivates this function. In an area where the broadcast reception is poor, select this mode.

On:

Activates this function. In normal conditions, select this.

Note

•Refer to the “Notes” in the above “Rec DNR”.

134