Toshiba D-R2SC, D-R2SU, D-KR2SU Recording Programing a recording REC MENU Continued Setting items

Recording

Programing a recording (REC MENU) (Continued)

Setting items

Exec	√		A timer program with this mark will be executed. To disengage, remove
			this indicator.
	2-69 (TV), 1-125 (Cable),		Select a channel you want to record.
CH	0-999 (When “IR control”** is		(While “L1” - “L3” is selected, the number buttons are not available to
	“ON”), L1-L3		select channels.)
	Specific date (from today to 2
	month later)
Date	Every Sunday to Saturday, Monday		Select a date of a TV program you want to record.
	to Thursday, Monday to Friday,
	Monday to Saturday, everyday.
			Enter a starting time of recording. (An initial setting is 10 minutes later than
Start*	12:00 am – 11:59 pm		current time.)
			You can also use the number buttons under the lid of the remote.
End*			Enter an end time. (Set the timer to begin recording no sooner than 2
	12:00 am – 11:59 pm		minutes past the current time.)
			You can also use the number buttons under the lid of the remote.
Media	DVD		Fixed. (Not adjustable.)
	SP		Standard setting of recording time and picture quality. (Not applicable
			when “L-PCM” is selected.)
	LP		For longer recording, but inferior to “SP” in picture quality. (Not
			applicable when “L-PCM” is selected.)
Video
	MN (Manual)		Customized setting of rate (bit rate).
			To set a rate automatically according to the remaining volume of the
	AT (Auto)		disc. (If the disc does not have room for the TV program, the program
			cannot be recorded to the end.)
			Not applicable when “SP”, “LP” or “AT” is selected. You can set a rate at
(Bit Rate)	1.4, 2.0-9.2		intervals of 0.2Mbps from 2.0 to 9.2. (The upper limit of the value
			depends on the “Audio” setting.)
		D /M1***	Standard setting.
Audio		D /M2***	Superior to	D /M1. Recommended for recording music programs.
	L-PCM		Uncompressed original digital audio. Equal quality to audio CD, but
			recordable time will be shorter.
Disc			A programmed recording onto a Reservation Disc is marked with an
			icon.

*If you set summer time on the clock of the recorder, see the notes on page 32 in the “INSTALLATION GUIDE”.

**See page 37 in the “INSTALLATION GUIDE”.

***The digital recording technology for consumer products of Dolby Laboratories is used for D /M1 and D /M2.

Dolby Digital 192 kbps is set for D /M1 and Dolby Digital 384 kbps for D /M2.

Notes

•See page 50 for details on “Video” and “Audio”.

•If you record with setting the bit rate to about 4.0 Mbps or below, the recorded pictures may not be played properly if change the playback speed. There will be noise, and the picture quality is lower than other rate settings.

Suggestions for the picture quality setting

•For normal recording or when you cannot decide which mode to choose. Select “SP.”

•When you need a longer recording time and video quality is not important Select “LP.” Inferior to “SP” in picture quality, but it can record longer.

•To record a high quality picture

Select “MN (Manual)” to set a desired bit rate. The higher the bit rate, better the picture quality is, but shorter the recording length becomes. We recommend that you set about 6.0 Mbps to 6.8 Mbps.

•To fill the disc

Select “AT (Auto).” A bit rate is calculated automatically according to the remaining volume of the disc. Some contents may not be recorded on the disc even if you select this function. This is not the function to make full use of the remaining space capacity.

40