Toshiba D-KR2SU, D-R2SU, D-R2SC owner manual 140, Remote control, Clock

Others

Before calling service personnel (Continued)

Remote control

The remote control does not work.

•The batteries in the remote control are exhausted.

→Replace all the batteries in the remote control ( page 12, “INSTALLATION GUIDE”).

•The light emitter of the remote control is not pointed at the receptor of this recorder.

→Point the emitter of the remote control at the receptor of this recorder.

•The receptor of this recorder is located too far away from the remote control.

→Operate the remote control within 7 meters (23 ft) from the receptor of this recorder.

•There are obstacles between the remote control and this recorder.

→Remove any obstacles.

•The receptor is disturbed by sunlight or fluorescent light.

→Change the place of this recorder or shield the light.

•The remote mode is not appropriate.

→Adjust the remote mode of the remote control and

this recorder ( page 48, “INSTALLATION GUIDE”).

Clock

The clock blinks.

→Complete the initial setting again ( page 28, “INSTALLATION GUIDE”).

The clock does not keep time.

→Set the time and date manually ( page 31, “INSTALLATION GUIDE”).

→Set “Summer time” or “Time zone” correctly ( page 32, “INSTALLATION GUIDE”).

140