Toshiba D-KR2SU To stop recording, To pause recording to omit an unnecessary portion, Press STOP

To stop recording

Press STOP.

To pause recording (to omit an unnecessary portion)

During recording, press PAUSE.

To resume recording, press it again.

Note

•Pausing recording automatically creates a new chapter division at that point.

To change a TV channel to be recorded

1)During recording, press PAUSE. Recording pauses.

2)Press CHANNEL to change the channel.

3)Press PAUSE to resume recording.

To view a TV program while recording another

1)Start recording on this recorder.

2)On a connected TV, select the TV mode.

3)Using the channel selector of the TV, select a desired channel on the TV.

To reduce noise on recordings (Rec DNR)

Before recording, set “Rec DNR” ( page 134).

Notes

•By setting an end time, it is memorized as a programmed one, and the indicator in the front panel display illuminates to indicate that the recorder holds a timer program of recording.

•The programmed end time must be set for 5 minutes later than the current time.

To play a title recorded on a DVD-RAM disc while recording another on the same disc (Recorded Title Play) DVD-RAM

During recording, you can play a title recorded on the same disc.

1)While recording on a DVD-RAM disc, press

CONTENT MENU.

2)Press / / / to select a desired title, then press ENTER.

Playback of the selected title starts.

Pressing the STOP button stops playback, and the content currently recorded returns. If you press the PLAY button, playback resumes from the location you last stopped.

Notes

•The playback picture may appear after a delay of several seconds.

•While you are using this function, the following operations/ functions are not available.

-Programmed playback (repeat playback, intro scan etc.)

-Editing (Playlist programming, dubbing, title/chapter naming, title thumbnail setting, etc.)

•Depending on the data condition, playback may pause.

Introduction RecordingPlayback

Editing

Library

To set an end time of a recording which is in progress

1)During recording, press QUICK MENU. The Quick Menu appears.

2)Press / to select “End time” then press

ENTER.

The display changes as follows:

	e.g.
		End time		:
			2		13	pm
3)	Press / to select an item then press ADJUST
	to change the value.
4)	Press ENTER.

Creating chapters while recording

Press the CHP DIVIDE button.

The content is divided into two chapters at the point you pressed the button.

Note

•If you want to divide into chapters at desired points on DVD-R/RW discs, use this method. On those discs, you cannot create chapters after recording.

Creating chapters automatically at regular intervals

Set “DVD-Video:CHP create” ( page 134).

Function setup Others

35