Toshiba D-KR2SU, D-R2SU, D-R2SC Recording Programing a recording REC Menu Remaining volume

Recording

Programing a recording (REC MENU) (Continued)

Remaining volume	Notes
1) Press REC MENU.	• When a Reservation disc is inserted in the recorder
	( page 48), you cannot check the remaining volume of
The REC MENU appears.
	other discs.
2) Press QUICK MENU.	• The nearest 8 programs are calculated at a time.
The Quick Menu appears.	• While the recorder is preparing for or executing a
	programmed recording, any program modification cannot
3) Press / to select “Disc budget calculation”	be registered. Only programs which will start after 5
then press ENTER.	minutes or later can be modified.
The Disc budget calculation menu appears.	• Available disc volume is not displayed for a DVD-R/RW
	disc on which DVD-Video finalize process was executed.

4)Press / to select a timer program, then press ENTER or press ADJUST.

The recorder calculates on a bar graph how much a specific program (identified by a check mark) will occupy on the disc.

Pressing the ADJUST button can display or remove the check mark.

e.g.
MENUREC Disc budget calculation									4/3 (Sa) 9:00 pm
	CH	Date	Start		End	Media		Video			Audio Result
	3	4/10 (Sa) 11:30		pm–11: 50 pm		DVD		MN 6.		6	D/M2
	10	4/13 (Tu)	9 :30	pm–10	:00 pm	DVD		MN 6.		6	D/M2
	42	4/16 (Fr) 10:30		pm–11	:30 pm	DVD		LP	2.	2	D/M1
	4	4/16 (Fr)	8 :30	pm–11	:30 pm	DVD		SP	4.	6	D/M2
HDDDV	Elapsed		( ) Selected(current)				Available				DVD

Selected entry Available disc volume

When the entry item is marked X, the recording does not fit. Change the setting.

5)Correct the parameters of the timer program if necessary.

(Skip to step 7 if you do not need this.) You can change “Video” and “Audio”.

Select an item you want to modify and press the ENTER button. The item will be ready to be altered. Press the ADJUST button to modify. When complete, press the ENTER button.

You can adjust to a lower mode (SP to LP) and/or lower the rate to reduce the quality of the recording, and thus provide more disc capacity (space).

6)Press .

Program modification is registered.

7)Press REC MENU to exit the GUI.

To stop a programmed recording

To finish,

Press on the front panel twice.

When you press it once, a message appears. While the message is displayed, press the button once again.

To pause recording,

Press on the front panel.

To resume recording, press it again.

Turning the power off automatically after completing a programmed recording

1)While executing a programmed recording, press QUICK MENU.

The Quick Menu appears.

2)Press / to select “Auto power off” then press ENTER.

Keeping the power on even after the programmed recording finished

If the recorder turns itself on to execute a programmed recording, it will turn itself off after finishing the recording. You can restrict this and keep the recorder powered on.

1)While executing a programmed recording, press QUICK MENU.

2)Press / to select “Continuous power on” then press ENTER.

44