The Basics

Answering a Call

Answering a Call

There are several ways to answer a call:

Handset

If your telephone is programmed for Ringing Line Preference, pick up the handset and the telephone automatically answers the ringing line.

If not, press the button associated with the ringing line (flashing green LED).

Speaker

If your telephone is programmed for Ringing Line Preference, press 6SNU and the telephone automatically answers the ringing line.

If not, press the button associated with the ringing line (flashing green LED). Once connected, you can continue on the speakerphone or lift the handset.

Handsfree Answerback

If you have a speakerphone, it may be programmed for Handsfree Answerback. You hear a single long tone, followed by the caller’s voice. The extension LED flashes green (incoming call). The Mic LED lights steady red (microphone is active). The Spkr LED flashes red.

1.Do not lift the handset; speak toward the telephone in a normal voice.

2.Press 6SNU or take the handset off-hook before transferring the call or placing it on hold.

Switching Between Handset and Speakerphone

Press 6SNU and place the handset on-hook to switch from handset to speakerphone mode.

Take the handset off-hook to switch from speakerphone to handset mode.

10

Strata CTX DKT3000/2000-Series Telephone 05/02

Page 24
Image 24
Toshiba DKT3000/2000 manual Answering a Call, Handsfree Answerback, Switching Between Handset and Speakerphone