Toshiba DKT3000/2000 manual Tone/Pulse Dialing, To change Tone Dialing

Advanced Operation

Tone/Pulse Dialing

The numbers are defined in Table 4:

Table 4	Dial String Characters
a￿Entry		Meaning
￿		0~9
		End of Speed Dial Number when entering via access code (￿￿￿￿
		Escape. “￿” functions as an escape key indicating that the number immediately following
￿		represents something exceptional. When ￿ is used as an escape character, it consumes
		one Speed Dial digit. Entering ￿￿to insert a seven-second pause would use two of 32
		characters.
		Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
￿￿￿￿￿a￿￿￿		pause escape sequences. For example, to insert a 17-second pause, enter ￿￿￿￿. The
		display of a pause in the Speed Dial Number shows a “P” without specifying the duration. In
		this example, you would see “PP.”
￿￿
￿￿		￿

Tone/Pulse Dialing

With some older Central Offices, you may have to make calls on outside lines programmed for rotary dial pulses. This feature enables you, while on these lines, to switch to tone dial to access remote equipment (such as an answering machine) requiring touchtones.

Note With ISDN calls, when 7RQH￿'LDO￿6HOHFW is pressed, all of the digits entered after that point will be sent with touchtones.

➤To change Tone Dialing

1.Access an outside line.

2.Dial a telephone number.

3.While on the call, press 7RQH￿'LDO￿6HOHFW. Although the outside line is programmed for rotary dial pulses, access the outside line and dial the telephone number like any other call described in this user guide.

The Tone LED lights steady red and you are able to send touchtones with your dial pad. The feature is cancelled when the call is completed.

50 Strata CTX DKT3000/2000-Series Telephone 05/02