The Basics
Microphone
Turning On/Off Message Waiting LED on Another Extension
If you call an extension and it’s busy or there is no answer, you can light that extension’s Message Waiting LED and enable that extension to call you back.
1.Dial an internal extension. You hear busy tone or there’s no answer.
2.Press 0VJ or . The Msg LED flashes red on the called telephone. At your telephone, the Msg LED lights steady red and the LCD shows the station number where you set a Message Waiting light.
3.Press 6SNU. Your Msg LED turns Off. The Msg LED on the called telephone flashes until the called party presses the flashing 0VJ button - which calls you back.
4.To turn Off a Message LED that you have set on another extension, press plus the extension number that has the message light set. Then hang up to release your telephone.
Microphone
➤To turn the Microphone On/Off when the speakerphone is active (Spkr LED is On), press 0LF.
When the Microphone is On, the Mic LED is On, steady red. When the microphone is Off, the Mic LED is Off and you cannot be heard through the microphone.
The microphone and its LED are always On when you receive a
Each station’s microphone can be set in system programming to:
•switch On/Off with one touch
•switch Off only while pressed and held
•either On/Off at the start of handsfree dialing.
➤To talk back to a Handset
12 | Strata CTX |
