Toshiba DVR620KC owner manual Press REC I to start recording, Press Stop C to stop recording

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

6	Press [REC I] to start recording.	7
	“I” will be displayed for 5 seconds.

I SP 1:53

Press [PAUSE F] to pause recording.

Press [PAUSE F] or [REC I] again to restart recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start.

Press [STOP C] to stop recording.

The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 68.) e.g.) DVD+R/DVD-RW/-R

Wait for a moment. 90%

This operation may take awhile to be completed.

I0:30

0:30

(normal recording) 1:00

8:00 7:30

•To change the recording length during one-touch timer recording, press [REC I] repeatedly until the desired length appears.

•To cancel one-touch timer recording within the specified time, press [STOP C].

Note

•When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•You cannot change the recording mode during the recording pause mode.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning the unit into the standby mode (One-touch timer recording will be canceled.).

-Using [REC I] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

•If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode.

•When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously.

38EN