Toshiba DVR620KC Timer Recording, 40 EN, Use K / L to enter the date, then, press B, mode

TIMER RECORDING

3	Use [K / L] to enter the date, then					Refer to “Recording Mode” on page 34 for DVD or
	press [B].					“Recording” on page 93 for VCR.
						• You can check the remaining recordable space
						of the disc when you select the recording
		Date	Start		End
						mode.
		JAN/06	- - : - -	- - : - -

L1/L2	REC To	Mode
L1	DVD		SP	Date	Start		End
		SP	2 : 00
				JAN/06	1 : 00AM	2 : 00AM
				L1/L2	REC To	Mode
JAN/01				L1	DVD		SP
			When pressing [L] at			SP	1 : 00
Daily

MON-SAT

MON-FRI

SAT

FRI

SUN

JAN/31

the current date, the

date will change as

follows.

e.g.) January 1st

Auto recording mode select (DVD only)...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

Date	Start	End
JAN/06	1 : 00AM	2 : 00AM
L1/L2	REC To	Mode
L1	DVD	Auto
		Auto 1 : 00

4 Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B].

Date		Start		End
JAN/06	1	: 00AM		- - : - -
L1/L2	REC To		Mode
L1		DVD		SP
			SP	2 : 00

time exceeds 12 hours.

	Use [K / L] to select an appropriate
	external input (L1/L2) to which your
5 external tuner is connected, then
	press [B].
		Date	Start		End
		JAN/06	1 : 00AM	2 : 00AM
		L1/L2	REC To	Mode
		L1	DVD		SP
				SP	1 : 00
6	Use [K / L] to select a recording media
	(“DVD” or “VCR”), then press [B].
		Date	Start		End
		JAN/06	1 : 00AM	2 : 00AM
		L1/L2	REC To	Mode
		L1	DVD		SP
				SP	1 : 00
7	Use [K / L] to select a recording
	mode.
		Date	Start		End
		JAN/06	1 : 00AM	2 : 00AM
		L1/L2	REC To	Mode
		L1	DVD		SP
				SP	1 : 00

program list.

•The recording may be cut short, when the available recording space of the disc is too limited.

8 Press [ENTER] when all items are entered.

After displaying an instructive message for 10 seconds, timer program list will appear.

Press TIMER SET to Timer Standby mode. Ensure the external source is tuned to the correct channel.

When Timer set on DVD or VCR,

it is not available in the standby mode.

Press TIMER SET to cancel the Standby mode.

Timer Programming

JAN/ 6/11 1:00 AM L1 SP
SP (1:00)		THU JAN/06 10:00AM
Date	Start	End	L1/L2
JAN/06	1:00AM	2:00AM	L1

Your program setting is stored.

•To set another program, repeat steps 2 to 8.

•To exit, press [TIMER PROG.] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue. To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 41.

Press [TIMER SET] to set a timer programming.

9		will appear on the front panel display, while this
	unit waits to make the recording.
		CS DR	CD
			HDD
			DVD

“VCR” will appear on the front panel display if VCR timer recording have been set.

40 EN