Toshiba G35 Enabling Power-onSecurity, Logon, 1Open the Control Center and go to Settings - System Settings

Toshiba Utilities	247
Fingerprint Authentication Utility

If the authentication fails, the system tries again up to two more times. If authentication fails after the third attempt, the system shuts down.

Enabling Power-on Security

Options for power-on security are displayed only if your computer supports this feature. In most configurations, power-on security is enabled automatically after the first user fingerprints are enrolled.

To disable/enable power-on security:

1Open the Control Center and go to Settings - Power-on Security. (This wizard is displayed only if your system supports power-on security.)

2Check the option Replace the power-on and hard drive passwords with the fingerprint reader.

Power-on security can be configured to operate with the fingerprint logon feature. If a fingerprint used for power-on security matches a fingerprint in an existing passport, the corresponding user is logged on automatically without having to enter the Windows® logon password.

NOTE	Your hardware must support Power-on security to use the
	single logon feature. You must have administrative privileges
	to change settings.

To enable power-on security single logon:

1Open the Control Center and go to Settings - System Settings.

2Select Logon.

3Check the Allow power-on security single sign-on check box. (Logon support must be enabled for this option to be accessible.)