Toshiba G35 Using the Toshiba Qosmio Remote Control, Media, Input, Set Up

158	Exploring Your Computer’s Features
	Using QosmioPlayer

Using the Toshiba Qosmio Remote Control

To begin using your remote control:

1Point the remote control at the remote control sensor. The remote control sensor is located on the front of your computer. Make sure there is nothing blocking the path between your remote control and the remote control sensor.

2If your computer is powered on, turn it off or place it in Hibernation mode.

3Perform one of the following steps:

❖To watch television, press the TV button to start QosmioPlayer in TV mode.

❖To play a DVD/CD, press the Media button to start QosmioPlayer in Media mode.

NOTE	Once QosmioPlayer starts, you can use the TV and Media
	buttons to switch between TV and Media modes.

4To access the inputs to the TV tuner (S-video, Composite In, and Antenna In), press the Input button with QosmioPlayer in TV mode.

5If you wish to watch television, press the Set Up button with QosmioPlayer in TV mode to display the QosmioPlayer Setup menu. Then use the arrow keys to select the desired options and press OK to accept them.

NOTE	The Setup menu is important when configuring television for
	the first time, because you can use it to scan the available
	channels.