![](/images/new-backgrounds/1217855/217855139x1.webp)
Day/Night Settings
Switch to B/W in night mode
Select this checkbox to enable the Network Camera to automatically switch to Black & White display during the night mode.
Disable IR LED
If you do not want to use the IR illuminators, you can select this option to turn it off.
IR cut filter
With a removable
■ Auto mode
The Network Camera automatically removes the filter by judging the level of ambient light.
■ Day mode
In day mode, the Network Camera switches on the IR cut filter at all times to block infrared light from reaching the sensor so that the colors will not be distorted.
■ Night mode
In night mode, the Network Camera switches off the IR cut filter at all times for the sensor to accept infrared light, thus helping to improve low light sensitivity.
■ Synchronize with digital input
The Network Camera automatically removes the IR cut filter when DI triggers.
■ Schedule mode
The Network Camera switches between day mode and night mode based on a specified schedule. Enter the start and end time for day mode. Note that the time format is [hh:mm] and is expressed in
Light sensor sensitivity
Select Low, Medium, or High sensitivity for the light sensor.
NOTE
When the object distance is near and
In such a case, enable BLC in the measurement window of exposure as shwn on page 74.
70