Toshiba L630, L635 manual Disassembling the ODD Drive, 8 Removing the bracket from the ODD drive

4.5 ODD Bay Module 4 Replacement Procedures

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails.

Disassemble the ODD drive according to the following procedures and Figure 4-8.

2.Remove two M2x3 black flat head screws.

3.Remove the bracket.

ODD BRKT

ODD driver

M2x3 black flat head screw

Figure 4-8 Removing the bracket from the ODD drive

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures and Figure 4-8.

2. Seat the bracket and secure it with two M2x3 black flat head screws.

Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-19