Toshiba L635, L630 manual Title Bar,  Program Name and Its Version Service Diagnostic Ver1.10

3 Diagnostic Programs 3.2 Quick Start

CONTINUE---- Continue the test;

SKIP---- Stop the sub-item of current test item to go to the next item’s test;

ABORT----Stop the current test item to test the next module.

ABORT ALL---- Stop all the selected test items. User could use the hot key Ctrl+D to achieve the same operation. When the user calls ABORT ALL, the following message box will prompt for his selecting.

4. Title Bar:

Title Bar located at the top of the window, it includes information as follows:

Program Name and Its Version: Service Diagnostic Ver1.10;

Test Module Name: Label the name and version of the test module. For example, in the above screen, the name of the test module is ‘Memory Tester Build Date 2007.02.09’.

Status Bar: Located at the bottom of the screen as follows:

The status bar is used to indicate the current script setting and test status. It consists of two lines that includes the information as follows:

Test Mode: TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above screen;

Script File Name: Script file name, e.g. ‘Custom.INI’ in the above screen;

Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2008-02-16 00:42:40’ in the above screen;

Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining test time at the same location as Current TIME (C. TIME) in the above screen;

Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number planning to execute and the current LOOP number have been finished, e.g. ‘COUNT: 01/01’ in the above screen;

CPU Temperature: Detect the temperature in the current CPU, e.g. ‘CPU: 56C’ in the above screen;

14 Satellite/Satellite Pro L630/L635 Maintenance Manual